WATER COOLER LEAKS
Automatic Water Leak Protection
Item # 4000
Shut off Valve
This Valve uses water pressure to sense water flow and activates a shut-off valve after a preset amount of water has been dispensed.
Once installed at the water connection, the SmartValveTM protects everything downstream, including tubing runs, filter housings, connections and equipment. Protects water lines running through walls, above ceilings, etc.
No Batteries! No Sensing Pads! No Wires! No Power Needed!
How It Works
Easily connects at the beginning of the water line to the filter system, POU cooler, coffeemaker, icemaker, etc.
At normal flow rates the valve will allow approximately 2-5 gallons (based on flow) to be dispensed in any one dispensing action.
If a leak is detected, and more than the set level is dispensed, the valve will cut off the water flow.
If less than the set level is dispensed, the valve resets for the next dispensing action.
If the valve cuts off water flow, the reset must be pressed to restart the water flow.
Limit the high cost of water damage due to leaks from installed water systems and water lines.
Reduce the potential for mold damage due to hidden leaks.
Compact size: approx. 5 wide x 5 1/4 high x 3 deep
Reliable, with only a few moving parts.
Non-electric, can be placed anywhere.
Works on line pressure and can detect even drip leaks which often cause more damage because they can go undetected for extended periods of time.
Low cost per unit